Product ID:27875 WH ENAMEL ODORLESS ALKYD INT SEMIGLOSS TT-E-509C
MSDS Date:03/12/1999
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CLCTC

CON-LUX COATINGS INC

226 TALMADGE RD
EDISON, NJ 08818-0847
US

Emergency Phone: 800-424-9300

Info Phone: 732-287-4000

Cage: 60189

CON-LUX COATINGS INC

847 EDISON, NJ 08818-0847 US

Telephone: 732-287-4000

Cage: 60189

TITANIUM DIOXIDE. (AS NUISANCE DUST)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3

CALCIUM CARBONATE. (AS NUISANCE DUST)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

1.0).

CAS: 64741-65-7

OSHA PEL 500 PPM OSHA PEL

ACGIH TLV: 100 PPM ACGIH TLV

ALUMINUM SILICATE. (AS NUISANCE DUST)

CAS: 1318-74-7

ACGIH TLV: 10 MG/M3 ACGIH TLV

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATION OF EYES AND SKIN MAY
OCCUR WITH OVEREXPOSURE. CONTINUED BREATHING OF VAPORS MAY IRRITATE
RESPIRATORY TRACT CAUSING HEADACHE, NAUSEA AND DIZZINESS. CHRONIC:
REPORTS HAVE ASSOCIATED RE PEATED AND PROLONGED OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN DAMAGE AND NERVOUS SYSTEM DAMAGE.
TARGET ORGAN EFFECTS: MAY AFFECT: DERMAL, NERVOUS AND PULMONARY
SYSTEMS.
Effects of Overexposure:SEE HEALTH HAZARDS ACUTE AND CHRONIC SECTION.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE RESPIRATION IF
NECESSARY. TREAT SYMPTOMATICALLY. EYES: FLUSH IMMEDIATELY WITH
COPIOUS QUANTITIES OF WATER FOR 15 MINUTES, MINIMUM. CONSULT
PHYSICIAN. DERMAL (S KIN): WASH AFFECTED AREAS WITH SOAP AND WATER.
REMOVE CONTAMINATED CLOTHING. CONSULT PHYSICIAN IF IRRITATION
PERSISTS. INGESTION: DRINK 1 OR 2 GLASSES WATER TO DILUTE. DO NOT
INDUCE VOMITING; IF OCCUR ING, KEEP HEAD AT OR BELOW KNEE LEVEL TO
PREVENT ASPIRATION INTO LUNGS. CONSULT PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY.

Flash Point:=49.C, 120.2F
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER MIST.
Fire Fighting Procedures:WEAR NIOSH-APPROVED SELF-CONTAINED BREATHING
APPARATUS AND FULL PROTECTIVE EQUIPMENT . SMOTHER FLAMES WITH ONE
OF EXTINGUISHING MEDIA LISTED ABOVE. WATER MAY BE USED TO COOL DOWN
UNOPENED CONTAI NERS IN VICINITY.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. WEAR
APPROPRIATE PERSONAL PROTECTION EQUIPMENT AND APPROVED RESPIRATOR.
PREVENT MATERIAL FROM CONTACTING ANY WATER SOURCES OR SEWERS
LEADING TO SURFACE WATERS.

Handling and Storage Precautions:STORE IN AREAS DESIGNATED TO COMPLY
WITH ANSI/NFPA 30 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE.
Other Precautions:GROUND CONTAINERS WHEN POURING LIQUIDS AND POWDERS TO
AVOID STATIC CHARGE BUILD-UP. DO NOT HANDLE UNTIL MANUFACTURER'S
SAFETY PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD. PROVIDE ADEQUATE
VENTILATION OR RESPIRATORY PROTECTION TO REMOVE DECOMPOSITION
PRODUCTS DURING WELDING OR FLAME CUTTING COATED SURF ACES.

Respiratory Protection:IN RESTRICTED VENTILATION AREAS, NIOSH-APPROVED
ORGANIC VAPOR RESPIRATOR RECOMMENDED. DURING SPRAY APPLICATION,
RESPIRATOR PROVIDING BOTH ORGANIC VAPOR AND SPRAY MIST PROTECTION
RECOMMENDED UNLESS ENG INEERING CONTROLS ARE ADEQUATE. IN OUTDOOR
OR OPEN AREAS, WHERE SUFFICIENT VENTILATION EXISTS, RESPIRATOR IS
GENERALLY NOT REQUIRED.
Ventilation:IN CONFINED SPACES, MECHANICAL VENTILATION REQUIRED TO KEEP
AIR CONTAMINANT CONCENTRATION BELOW CURRENT APPLICABLE OSHA
PERMISSIBLE EXPOSURE LEVELS.
Protective Gloves:IMPERVIOUS TYPE REQUIRED FOR LONG OR REPEATED
OVEREXPOSURE.
Eye Protection:USE ANSI APPROVED SAFETY EYE WEAR TO PROTECT AGAINST
SPLASH OF LIQUIDS.
Other Protective Equipment:EYEWASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . PREVENT PROLONGED SKIN CONTACT WITH CONTAMINATED
CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
WASHROOM FACILITIES.
Supplemental Safety and Health

Boiling Pt:=64.4C, 148.F
B.P. Text:148 - 346F
Vapor Density:HEAV AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NO APPEARANCE OR ODOR SPECIFIED BY MANUFACTURER .
Percent Volatiles by Volume:49.40

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, SPARKS OR OPEN FLAMES.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Transport Information:DOT CATEGORY: FLAMMABLE LIQUID.